Custom Tilt Bed Motorcycle Trailer – $1700 (Seattle)

Description

This tilt feature with the drop ramp in the back makes for fast and easy loading. Just pull the pivot lock pins in the front, flip the ramp down in the back and ride up onto the trailer. The ramp is permanently attached by hinge on the rear edge of the trailer. The trailer will tilt down when the front tire makes contact with the top of the ramp. Then just ride up slowly and the trailer tilts over to the travel position. On flat and level ground, the bike will stand up with the front wheel in the chock while tie down is accomplished. Lots of tie down loops welded down the sides of the trailer frame.

It has carried a late model Goldwing, so it can handle pretty much any motorcycle.

The drop axle on this trailer allows for lower deck height and easier loading. This trailer pulls very smooth, I pulled it with my Honda CRV.

There is a bicycle rack on the front. Tires are in good shape and it also has a spare. There is a tongue wheel that allows easy movement on flat surfaces, even with the motorcycle loaded.

This is a custom built trailer that was built in Oregon. It has no title. There is an application process in Washington to acquire a title, with the use of a bill of sale to start the process. I just moved here from Oregon and never needed to have plates or title for this weight and purpose of trailer as long as I pulled it with my Oregon registered vehicle. I now have Washington plates.

h2qm8-6062353690@sale.craigslist.org