Motorcycle Trailer(Pull behind) – $500 (Dallas)

Description

I’m selling my homemade Motorcycle trailer (pull behind). It started out as a kit trailer from Northern Tools. I’ve welded all joints that were originally just bolted together. The axle was cut and re-welded and re-enforced with a angle iron for durability and strength, which allowed me to cut the width to the size of the carrier. The base plate is aluminum diamond plate and the rear lights are boxed in diamond plate along with the fenders. There are lots of LED lights all the way around except the turn signals. Cooler box is also diamond plate. The tongue was also extended to 7+ feet to help on the tracking while towing and tongue is welded to the frame. A swivel hitch was added to aid in the pulling in the twisties. I’ve reduced the leaf springs for a softer ride and added rubber tubes on the bolts to keep the ride quiet. 2 Locks secure the top when loaded and is pretty secure. I’ve owned it since 2008 and have pulled it cross country, through the Rockies, Smokey mountains, Canada, Black Hills and everything in between. It has a spare tire mounted under the back that has never been used. I’ve loaded it down with luggage and stuff for my cross country trips my wife and I take annually with no issues. About 20-25 lbs tongue weight when fully loaded (Proper loading techniques should be used). It pulls like it’s not there.

It’s registered as homemade and only requires a bill of sale to re-register it. It’s ready to go for your next trip. $500 cash OBO. No trades. Text is easiest to get a hold of me.

(817) 933-6734